ISO 9001 Certified Factory
Drone Battery Applications
Semi-solid-state and smart lithium packs for spraying, heavy-lift, inspection, emergency and security UAVs. Tell us the mission and we size the series, capacity, discharge rate and BMS.
Find batteries by application
Each mission loads a battery differently. Start with your application to see the pack configurations, discharge ratings and models we recommend.
Match the pack to the mission
Typical starting points from the projects we supply. Final sizing depends on airframe weight, payload, flight-time target and operating temperature.
| Application | Typical pack | What matters most | Recommended range |
|---|---|---|---|
| Agricultural Spraying Drones | 14S or 18S, 22–30Ah, 15C | Peak current, fast turnaround, sealed case | Smart Drone Battery, UAV Chargers |
| Heavy-Lift & Delivery Drones | 12S–24S, 72–150Ah | Payload against range, take-off current | 400Wh/kg Series, 350Wh/kg Series, High Voltage & Density |
| Inspection & Mapping Drones | 6S–14S, 22–80Ah | Flight time per kilogram, stable sensor power | 400Wh/kg Series, 350Wh/kg Series |
| Emergency Response Drones | 6S–14S, 30–72Ah | Thermal safety, readiness, cold starts | 350Wh/kg Series, UAV Chargers |
| Security & Patrol Drones | 6S–12S, 15–40Ah | Frequent cycles, dock communication | 350Wh/kg Series, 320~270Wh/kg Series |
Not sure where your project fits? Send us your airframe data and we will suggest a starting configuration.
Why semi-solid-state cells suit commercial missions
A semi-solid electrolyte lets us store more energy in each cell while improving thermal stability: our cells pass nail penetration testing, and our pack designs go through thermal shock, salt spray, rain and EMC tests. For FPV and racing, where burst discharge matters more than endurance, we still build high-C LiPo and LiHV packs.
400Wh/kg
Cell energy density of our SLD4 range, the highest we build
20–50%
Higher energy density than conventional LiPo packs
−20°C
Discharge stays strong even below this temperature
6S–24S
Standard and custom series configurations
From mission profile to production pack
Most projects start with a handful of numbers: airframe weight, payload, target flight time, voltage window and battery bay size. Our engineers turn them into a pack proposal, build samples for your flight tests, then move to volume production in our Shenzhen factory.
- Share your mission profilePayload, flight time, flight controller and bay dimensions. An engineer replies within 24 hours.
- Get a pack proposalCell grade, series and capacity, discharge rating, BMS protocol, case and connector.
- Validate samplesFlight-test samples on your airframe; we adjust the design from your results.
- Scale to productionISO 9001 production with incoming cell inspection, capacity checks and aging tests, shipped worldwide with DDP options.
Application FAQs
Which drone battery is right for my application?
Start from the mission. Spraying drones need high-discharge smart packs (14S or 18S, 15C) that tolerate frequent charging. Heavy-lift and long-endurance inspection drones gain most from 350–400 Wh/kg semi-solid-state packs, where every kilogram saved becomes payload or flight time. Send us your airframe weight, payload and target flight time and we will recommend a configuration.
Can you build a custom battery for my airframe?
Yes. We customise series count (6S–24S), capacity, cell energy density, case dimensions, BMS functions and communication protocol, connectors and wire length, and white-label branding.
How do semi-solid-state batteries compare with LiPo for commercial drones?
Semi-solid-state cells deliver 20–50% higher energy density than conventional LiPo, better thermal stability and stronger discharge in cold weather. LiPo still makes sense for short, very high-burst flights such as FPV racing, which is why we offer both.
Do you supply matching chargers?
Yes. We supply EV-PEAK UAV chargers in dual- and four-channel versions for 6S to 14S packs, plus industrial chargers for high-cell-count batteries, and match the charger to your pack configuration.
Do you ship internationally and offer after-sales support?
We ship worldwide, including DDP delivery. European customers are supported by our sales office and warehouse in Madrid and our battery after-sales service location in Warsaw, and we have a sales office in Chennai, India.